Spray Booth – High Efficiency Venturi System

VT Series is a improved design of our previous model. This series is based on 40 years of booth manufacturing experience. Constant suction air flow with high collecting efficiency is the first priority in design of this series..

Spray Booth – Dry Filter System


DB Series is the most economical series in the market. The Series is ideally suited for limited or intermittent spray operations such as refinish shops, schools and production lines where paint consumption is moderate..

VW Series Spray Booth

VW Series Spray Booth

The VW series spray booth uses the unique, patented venturi plate to provide continual mixing throughout the tank. A fan create a high velocity air stream across the surface of water tank. This causes the surface to shear and liquid is entrained by the air.

Modular Air Supply Unit
MSU Modular Air Supply Unit

MSU is a Modular Supply Unit.The function of MSU is to supply clean air from outside to a spray
booth in order to balance pressure inside. The unit is built in with a suction blower and 2-step of filters.

Paint Sludge Flotation Unit
Paint Sludge Flotation Unit

The change of water in the spray booths must be carried out only every 12 months maximum;
By extracting the mud continuously the booth water volume will be reduced up to 70% ;

Cubic Baking Oven Model: BO


Cubic oven is designed for small batch production with part on racks. Max temp is 250 C. This series can be run on electric heater or natural gas burner..

Conveyor System (Floor / Overhead)


TPT offer an extensive range of overhead and floor conveyor systems ranging from simple manual systems through powered single line to complex power & free system..

Paint Circulation System (PCS)


A precision paint circulation system has capability to supply multi paint station in painting shop. Paint quality control can be done centrally in a mixing room.

Conveyorized belt oven Model: CO


The IR belt oven is designed for continuous operation. It has been engineered to be easier to clean inside the oven than previous version.

Conveyorized overhead oven Model: CH


A tunnel oven is suitable for medium to large plastic / metal parts. Max temp can be up to 200 c. The parts can be convoyed by a floor or an overhead conveyor..


Application : part cleaning or wipe / air blow or dust off  before painting process